Digi 34 Uživatelská příručka stáhnout pdf (Strana 46)

46 Chapter 4 IA Profiles and Procedures

DF1 Profile: Serial-Connected Slave

About This Profile

Use this profile to connect a slave device (or devices if multiple slaves are

connected) using DF1 Full-Duplex and DF1 Half-Duplex protocols.

Configuration Options

The serial port connection must be configured for the protocol required by

the slave, in this case DF1 Full-Duplex or DF1 Half-Duplex.

The network connection usually does not require configuration. The only

exception is if the master requires COM port redirection. In this case, the

master is an application that resides on a PC, such as a Microsoft Windows

system, and communicates only with devices on COM ports.

Locating Setup Information

• To configure the serial port of the device server for DF1 Full-Duplex

or DF1 Half-Duplex, see "Configuring a Serial-Connected Slave:

Generic Procedure" on page 49.

• To setup a PC and the device server for COM port redirection using

RealPort, see "Setting Up COM Port Redirection" on page 52.

DF1 Profile: Serial-Connected Master

About This Profile

Use this profile to connect a master device using DF1 Full-Duplex and DF1

Half-Duplex protocols to the serial port.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Vikiqqs 04 Jan 2024 | 11:28:05

urenrjrjkvnm

Digi 34 Uživatelská příručka Strana 46