Digi CM Uživatelský manuál stáhnout pdf

Congratulations!

You have successfully

installed your Digi CM.

Are you a POWER USER? Use the conguration menu:

1. Establish a serial connection through the console port (9600, 8, N, 1).

2. Login as root and password dbps.

3. Type the command congmenu. Select option 1 - Network

Conguration and follow the prompts.

4. Enter the IP address in the URL address bar of your browser and go to

step 4 - Test Conguration.

Shift

1 Verify kit contents

Digi, Digi International, Digi CM and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.

3 Assign network settings

Quick Start Guide

Digi CM

™

Verify that your kit contains one each

of the following components:

2 Connect hardware

Digi CM 32 (shown)

Power supply

RJ-45 cable

DB-9F console

adapter

4 Test conguration

Connect Ethernet

cable

Digi CM

Connect power

supply

DB-25F console

adapter

DB-25M modem

adapter

RJ-45 diagnostic

loop back

A free hard copy of the User Guide can be ordered at: www.digi.com/csuserguide

2 brackets

Switch

power on

Insert RJ-45 diagnostic loop

into Port# 1

Digi CM

Enter,

User ID: root

Password: dbps

On the left navigation bar, click Serial Port > Connection> Port Title #

Username: root

Password: dbps

Verify your connection to the port by

typing some text. If the text appears

correctly on the screen the

conguration is correct.

Click Close to exit port.

Software CD

From the CD, run the Advance

Device Discovery Protocol

application to locate the Digi CM on the

network. In rmware 1.8 and greater,

the CM has SNMP, SSHv1, and Telnet to

the command line disabled by default,

and http is automatically redirected to

https. To perform initial device

conguration, use the discovery tool on

the CD (also available from the Digi

website) or use our straight-thru serial cable with the appropriate adapter to

the CM console port, https, or SSHv2.

Congure the device for your

application using your browser.

To get back to your Digi CM after

your initial conguration, enter

the IP address in the URL address

bar and log in. Use the navigation

bar on the left to alter your conguration.

DB-9M modem

adapter

Connection Adapters (in quantities of 8) Order # Application

DB-9M Modem adapter 76000702 DCE devices such as

modems with DB9

female ports

DB-9F 76000671 Bay Accelar, Nortel

and other DB-9 DTE

DB-25F Console adapter 76000673 DTE devices with

DB-25 male ports

DB-25M Modem adapter 76000670 DCE devices such as

modems

DB-25M Console adapter 76000672 Sun SPARC and other

DTE devices with

DB-25 female ports

Below is a list of available adapters and part numbers.

Console adapter

PN 90000300_E

Quick Start Guide 1

Shrnutí obsahu

Strany 1 - Quick Start Guide

Congratulations! You have successfullyinstalled your Digi CM.Are you a POWER USER? Use the conguration menu:1. Establish a serial connection through

Další dokumenty pro Sítě Digi CM

Zobrazit dokument Digi CM Uživatelská příručka

Digi CM Uživatelská příručka (158 stránky)

Digi CM Uživatelská příručka (202 stránky)

Komentáře k této Příručce

Žádné komentáře

Digi CM Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Digi CM. Quick Start Guide - Digi International Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Sítě Digi CM

Komentáře k této Příručce

Související produkty a manuály pro Sítě Digi CM