Digi NS9210 Specifikace stáhnout pdf (Strana 50)

50 NS9210 Processor Module Hardware Reference

Chapter 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C interface

C header The I²C interface has only one device connected to the bus on the development

board - an I/O expander (see next paragraph). Otherwise, additional I²C devices

(like EEPROMs) can be connected to the module by using I²C header X15. The

pinning of this header is provided below.

C digital I/O

expansion

The development board provides a 3.81mm (1.50") green terminal block, X44, for

additional digital I/Os. The I

C I/O port chip is on-chip ESD-protected, 5V tolerant,

and provides an open drain

interrupt output.

I2C digital I/Os, X44I2C header, X15

Pin Signal

1 I2C_SDA/GPIO103

2 +3.3V

3 I2C_SCL/GPIO102

4 GND

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Komentáře k této Příručce

Žádné komentáře

Digi NS9210 Specifikace Strana 50

Komentáře k této Příručce