Digi LTS 32 Instalační příručka stáhnout pdf (Strana 56)

Syntax Configure autoconnect

set autoconnect

[port={range|xbee|internalmodem}]

[state={on|off}]

[trigger={always|data|dcd|dsr|string}]

[service={raw|rlogin|ssl|telnet|ssh}]

[description=string]

[ipaddress=ip address]

[ipport=ip port]

[connect on string=string]

[flush_string={on|off}]

[keepalive={on|off}]

[nodelay=on|off]

Display autoconnect settings

set autoconnect [port={range|xbee|internalmodem}]

Options port={range|xbee|internalmodem}

Used to specify the serial port. Optional on a single-port device.

To configure settings for the XBee port, specify “port=xbee.”And to

configure settings for an internal modem port, specify

“port=internalmodem.”

state={on|off}

Enables or disables the autoconnect feature.

Enables the autoconnect feature.

off

Disables the autoconnect feature.

The default is off.

If you are using the serial port for another purpose, it is recommended this

value be set to “off.”

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 190 191

Žádné komentáře

Digi LTS 32 Instalační příručka Strana 56