Digi Digi One EM Instalační příručka stáhnout pdf (Strana 120)

set snmp

120 Chapter 2 Command Descriptions

set snmp

Devices

supported

This command is supported in all Digi Connect Family devices.

Purpose Configures the Simple Network Management Protocol (SNMP) agent, or

displays current SNMP settings.

Required

permissions

Permissions must be set to “set permissions s-snmp=read” to display

network service settings, and “set permissions s-snmp=rw” to display and

change network service settings.

Syntax Set SNMP settings

set snmp [trapdestip=ipaddress|publiccommunity=string|

privatecommunity=string|setsenabled={on|off}|

authfailtrap={on|off}|coldstarttrap={on|off}|

linkuptrap={on|off}|logintrap={on|off}]

Display current SNMP settings

set snmp

Options trapdestip=ipaddress

Used to configure the IP address of the system to which the agent should

send traps. To enable any of the traps, a non-zero value for trapdestip

must be specified.

The” trapdestip” option is required in order for alarms to be sent in the

form of SNMP traps. See "send" on page 43.

publiccommunity=string

The password required to “get” SNMP-managed objects. The default is

“public”.

privatecommunity=string

The password required to “set” SNMP-managed objects. The default is

“private”.

setsenabled={on|off}

Enables or disables “sets” of SNMP-managed objects.

Enables “sets” if the provided private community matches the current

private community.

off

Disables “sets” even if the provided private community matches the

current private community.

The default is “off.”

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 167 168

Žádné komentáře

Digi Digi One EM Instalační příručka Strana 120