Digi Digi One EM Instalační příručka stáhnout pdf (Strana 54)

set autoconnect

54 Chapter 2 Command Descriptions

Examples Set autoconnect on with trigger

This example shows setting autoconnect to connect to the TCP port (2101)

of the network IP destination when data arrives on the serial port.

set autoconnect state=on trigger=data ipaddress=10.0.0.1

ipport=2101

Allow outgoing data that is either unacknowledged or is less than maximum

segment size

set autoconnect port=1 nodelay=on

Žádné komentáře

Digi Digi One EM Instalační příručka Strana 54